Recombinant Mouse Heparan Sulfate-6-O-Sulfotransferase-3, CF
Recombinant Mouse Heparan Sulfate-6-O-Sulfotransferase-3, CF Summary
Product Specifications
Pro28-Trp470, with an N-terminal 6-His tag
Analysis
Product Datasheets
Carrier Free
CF stands for Carrier Free (CF). We typically add Bovine Serum Albumin (BSA) as a carrier protein to our recombinant proteins. Adding a carrier protein enhances protein stability, increases shelf-life, and allows the recombinant protein to be stored at a more dilute concentration. The carrier free version does not contain BSA.
In general, we advise purchasing the recombinant protein with BSA for use in cell or tissue culture, or as an ELISA standard. In contrast, the carrier free protein is recommended for applications, in which the presence of BSA could interfere.
5406-ST
| Formulation | Supplied as a 0.2 μm filtered solution in Tris, NaCl and EDTA. |
| Shipping | The product is shipped with polar packs. Upon receipt, store it immediately at the temperature recommended below. |
| Stability & Storage: | Use a manual defrost freezer and avoid repeated freeze-thaw cycles.
|
Assay Procedure
- Universal Sulfotransferase Activity Kit (Catalog # EA003)
- 10X Assay Buffer (supplied in kit): 500 mM Tris, 150 mM MgCl2, pH 7.5
- Recombinant Mouse Heparan Sulfate 6-O-Sulfotransferase 3/HS6ST3 (rhHS6ST3) (Catalog # 5406-ST)
- Donor Substrate: PAP32S (3'-Phosphoadenosine-5'-Phosphosulfate) (Catalog # ES019)
- Acceptor Substrate: Heparan Sulfate (Celsus Labs, Catalog # HO3105), 50 mg/mL stock in deionized water
- 96-well Clear Plate (Catalog # DY990)
- Plate Reader (Model: SpectraMax Plus by Molecular Devices) or equivalent
- Prepare 1X Assay Buffer by combining 10X stock and diluting 10 fold with deionized water.
- Dilute 1 mM Phosphate Standard by adding 40 µL of the 1 mM Phosphate Standard to 360 µL of 1X Assay Buffer for a 100 µM stock. This is the first point of the standard curve.
- Continue standard curve by performing six one-half serial dilutions of the 100 µM Phosphate stock in 1X Assay Buffer. The standard curve has a range of 0.078 to 5 nmol per well.
- Load 50 µL of each dilution of the standard curve into a plate. Include a curve blank containing 50 μL of 1X Assay Buffer.
- Prepare a reaction mixture containing 0.4 mM PAP32S and 6 mg/mL Heparan Sulfate in 1X Assay Buffer.
- Dilute Coupling Phosphatase 3 (supplied in kit) to 50 µg/mL in 1X Assay Buffer.
- Dilute rmHS6ST3 to 33.34 µg/mL in 1X Assay Buffer.
- Load 15 µL of the 33.34 µg/mL rmHS6ST3 into empty wells of the same plate as the curve. Include a control containing 15 µL of Assay Buffer.
- Add 10 µL of 50 µg/mL Coupling Phosphatase 3 to wells containing enzyme and control, excluding the standard curve.
- Add 25 µL of reaction mixture to the wells, excluding the standard curve.
- Seal plate and incubate at 37 ºC for 20 minutes.
- Add 30 µL of the Malachite Green Reagent A to all wells. Mix briefly.
- Add 100 µL of deionized water to all wells. Mix briefly.
- Add 30 µL of the Malachite Green Reagent B to all wells. Mix and incubate for 20 minutes at room temperature.
- Read plate at 620 nm (absorbance) in endpoint mode.
- Calculate specific activity:
|
Specific Activity (pmol/min/µg) = |
Phosphate released* (nmol) x (1000 pmol/nmol) |
| Incubation time (min) x amount of enzyme (µg) |
*Derived from the phosphate standard curve using linear or 4-parameter fitting and adjusted for Control.
Per Reaction:- rmHS6ST3: 0.5 µg
- Coupling Phosphatase 3: 0.5 µg
- Heparan Sulfate: 150 ug
- PAP32S: 0.2 mM
Reconstitution Calculator
Background: Heparan Sulfate 6-O-Sulfotransferase 3/HS6ST3
Heparan sulfate is a highly sulfated polysaccharide that can be found on the cell surface and extracellular matrix. It is usually covalently attached to a protein core as the glycan component of a proteoglycan. Heparan sulfate interacts with a variety of proteins, such as growth factors, protease inhibitors, cytokines, lipoprotein lipase and viral envelope proteins, therefore playing roles in cell growth, cell differentiation, cell motility, blood coagulation, lipid metabolism and viral infection (1, 2). Heparan sulfate consists of repeating residues of uronic acid and N-acetylglucosamine. The uronic acid residues can be sulfated at the 2‑O position by heparan sulfate 2‑O‑ sulfotransferase. The N-acetylglucosamine residues can be sulfated at N-, 3‑O, and 6-O positions by N-deacetylase/N-sulfotransferases, heparan sulfate 3-O- and 6-O-sulfotransferases, respectively. However, the reactions catalyzed by these sulfotransferases are normally incomplete on the whole chain of heparan sulfate. As a result, heparan sulfate displays enormous sequence diversity that allows it to interact with a wide spectrum of proteins differently. Three heparan sulfate 6-O-sulfotransferases are found both in human and mouse possibly with overlapping substrate specificity (3). HS6ST3 is ubiquitously expressed while HS6ST1 and HS6ST2 are expressed primarily in the liver and brain/spleen, respectively. Mouse HS6ST3 has 94% amino acid sequence identity with the human ortholog.The activity of the recombinant HS6ST3 has been measured with a phosphatase-coupled sulfotransferase assay (4).
- Bernfield, M. et al. (1999) Annu. Rev. Biochem. 68:729.
- Esko, J. D. and Selleck, S. B. (2002) Annu. Rev. Biochem. 71:435.
- Habuchi, H. et al. (2000) J. Biol. Chem. 275:2859.
- Prather, B. et al. (2012) Anal. Biochem. 423:86.
FAQs
No product specific FAQs exist for this product, however you may
View all Proteins and Enzyme FAQsReviews for Recombinant Mouse Heparan Sulfate-6-O-Sulfotransferase-3, CF
There are currently no reviews for this product. Be the first to review Recombinant Mouse Heparan Sulfate-6-O-Sulfotransferase-3, CF and earn rewards!
Have you used Recombinant Mouse Heparan Sulfate-6-O-Sulfotransferase-3, CF?
Submit a review and receive an Amazon gift card.
$25/€18/£15/$25CAN/¥75 Yuan/¥2500 Yen for a review with an image
$10/€7/£6/$10 CAD/¥70 Yuan/¥1110 Yen for a review without an image
